Universal Testing Machine (BOTH OPTIONS SERVO & VFD)
Highly accurate position control with high range of
• Accurate start and stop instanatly using 32
• Four line and 20 characters controller with
• Automatic calculation of modulus @different
• Multi unit display in Kg, pound, Newton mm,
cm, inch selectable
• Direct display on controller and numeric
• Safety norms of over load in auto as well as
• Safety norms of over travel in auto mode.
• Tests preprogramming facility for Tensile,
Flexural, Peel, Bond, Compression, Cyclic endurance
based on load, travel, time
• Data lock for calibration and master
Computerized twin screw universal
testing machine to determine properties Of tensile &
elongation as per astm d 638 & compression as per astm d
695 with auto stop, auto reverse facility & direct
display of result through 32 bit micro controller having
4 lines and 20 character display. this equipment is
suitable to check properties of tensile, elongation,
flexural (three point bending), compression tests on
polymers, compounds, composite materials, fibre
reinforced plastics (frp) and polymeric materials.
Load capacity: Various different capacities can be
offered up to 5000 kg.
No. of load cell: Optional One or Two.
Cross Travel: up to 1000 mm
Facility of full scale elongation as well as
Extensometer gauge length elongation (OPTIONAL)
Horizontal day light: 450mm
Speed: Variable between 0.5mm/minute to 800mm/minute
depending on model.
Paint: Powder coated.
Power: 230 Volts, 50Hz, single phase.
All results such as Peak load, Elongation at Peak load,
Break load, Elongation at break load, % elongation at
Peak, % elongation at Break, Tensile strength at Peak,
Tensile strength at Break, Flexural stress, Compression
Strength, Secant Modulus, Tangent Modulus & Flexural
Modulus are directly displayed on Microcontroller as
well as through PC software